Archives: Produkty

FLOOD BARRIER 10 M WITH INTERNAL SLEEVE 23 M (POLYESTER)

Written by [email protected] on August 26, 2013.

Barrier is designed for building floodbanks or for their elevation. Consists of two sleeves. Internal sleeve is to be filled with water. External sleeve serves as its sheathing. The system’s advantages are small weight, it’s easy to move, store and install. Barriers are packed by three pieces a set, together with closing straps. height about 40-50 cm (depending on the terrain) width about 100 cm length 10 m (one segment can contain about 3000 dm of water) weight of one barrier about 10 kg dimensions of packed barrier: 1,1m x 40cm x 5 cm. One 10m segment substitutes about 170 sandbags....

10M PVC FLOOD BARRIER

Written by [email protected] on August 26, 2013.

Water-filled high-water dams are an alternative to dams built with sandbags. The dams form a closed water basin. They are made of a 3-layer, pvc-coated watertight fabric. This makes them particularly resistant to long-term effects of water, air, and UV radiation. The materials used make the dam reusable. The dam is used to build or heighten flood banks. The main advantages if our water-filled high-water dams are: quick and easy assembly and disassembly, the height of the dam from 0.8 m to 1.5 m, length from 10 m to 20 m. (maximum), option to connect any number of dams in various...

DECONTAMINATION CABIN (3 SEGMENTS)

Written by [email protected] on August 23, 2013.

The cabin is designed for cleaning and disinfecting protective clothing contaminated with chemical substances. Thanks to using three decontamination lines (cabins) height throughput is obtained â€“ 3 persons at a time are decontaminated. Construction elements of the cabin: Pneumatic frame made of polyamide rubberized fabric, removable bottom attached to the bottom tube of the frame, removable film curtain attached to top and side tubes of the frame. The cabin’s standard equipment includes a spray line with pressure supply hose; the line may be supplied by a pressure sprayer. length...

DECONTAMINATION CABIN (1 SEGMENT)

Written by [email protected] on August 23, 2013.

The cabin is designed for cleaning and disinfecting protective clothing contaminated with chemical substances. The cabin consists of the following structural elements: Pneumatic frame made of rubber-coated polyamide fabric, Removable bottom, attached to the lower tube of the frame, Removable foil curtain attached to the upper tube of the frame. The standard version of the cabin is equipped with a spraying line consisting of 8 spray heads and a pressure hose; the line can be fed by a high-pressure cleaner, i.e. Kärcher . The maximum allowed volume of liquid supplied to the device: 12...

1-SEGMENT PVC DECONTAMINATION CHAMBER

Written by [email protected] on August 23, 2013.

The inflatable PVC cabin is designed for cleaning, disinfecting and decontaminating protective clothing contaminated with chemical substances. Design The inflatable frame is made of polyester fabric coated on both sides with Polyvinyl Chloride (PVC). The cabin features a single pneumatic chamber with two inlet/outlet air valves and one overpressure valve. The frame can be inflated by means of a pressurized air tank, an AC/DC compressor or a foot-operated pump. Each cabin features 2 entrances/exits situated opposite each other, as well as special hand sleeves with protective gloves for...

TNP

Written by [email protected] on August 23, 2013.

designed for service-repair works in field conditions thanks to coated PCV and an automatic system of maintaining pressure in chambers the tent guarantees complete protection against adverse weather conditions in temperature ranges from -30oC to +50oC the tent construction based on pneumatic frames allows it to be set up in all field conditions the entrances of the tent situated in the headwalls facing each other enable vehicles to drive through without the need of reversing; in the position with completely lifted bays the gateway dimensions are equal to the tent’s cross-sectional size...

NS-97

Written by [email protected] on August 23, 2013.

It is intended for group camping, as a storage facility or for carrying out activities which require protection against unfavourable weather conditions. The shape of the tent resembles a cylinder cut through the middle and the face walls are made of two parts buckled with loops. Window openings with replaceable celluloid panes are fitted in the side walls. Two additional openings can be used to connect heat blowers. The design of the tent enables connecting several tents in series. It is made of cotton-polyester fabric with waterproof, antifungal and flame resistant impregnation. It is...

LIGHTWEIGHT RPG NET SCREEN

Written by [email protected] on August 22, 2013.

The lightweight RPG net screen is designed to protect vehicles and other military objects against impacts from PG 7W and PG 7WM type High Explosive Anti-Tank (HEAT) grenades. The system is composed of individual net modules tailored to the size and dimensions of the object to be protected. KEY FEATURES: The lightweight frame is made of composite or aluminum alloy materials.−The strings have high tensile strength. Special coating protects the net against adverse weather conditions. The strings tension is made possible by textile straps located on the sides of the...

ANTISTATIC GOWN PROTECTING AND ANTISTATIC SUIT

Written by [email protected] on August 22, 2013.

The gown and antistatic suit protecting protects workers from exposure to concentrated hydrofluoric acid. Usable for very short periods â€“ up to 10 minutes of exposure to liquid concentrated hydrofluoric acid. It is designed for employees in the chemical industry working in an environment with explosive atmospheres, i.e. in laboratories.